中華人民共和國國家標準(中國大陸GB標準)英文版

GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務;
       
  GB/T 20114-2019
普通电源或整流电源供电直流电机的特殊试验方法(中英文版)
Specific test methods for d.c. machines on conventional and rectifier-fed supplies
  GB/T 37477-2019
救援装备水面搭载与吊放仿真试验方法(中英文版)
Simulation test methods of surface support,launch and recovery for rescue system
  SJ/T 11582-2016
动力型超级电容器电性能测试方法(中英文版)
(Power supercapacitor electrical performance test methods)
  YD/T 3009-2016
对支持h.248协议设备的安全性测试方法(中英文版)
(Support for H.248 protocol device safety testing methods)
  GB/T 13722-2013
移动通信电源技术要求和试验方法(中英文版)
Performance requirements and testing methods for power supplies used in the mobile communication
  YD/T 2656-2013
基于240V/336V直流供电的通信设备电源输入接口技术要求与试验方法(中英文版)
Technical requirements and testing methods for 240V/336V direct current telecom equipment power supply unit input interface
  YD/T 2654-2013
无线电源设备电磁兼容性要求和测量方法(中英文版)
Requirements and test methods of electromagnetic compatibility for wireless power supply equipment
  GB 17578-2013
客车上部结构强度要求及试验方法(中英文版)
Requirements and test methods of strength for the superstructure of bus
  GB/T 29160-2012
带辅助能源的太阳能热水系统(储水箱容积大于0.6m3)性能试验方法(中英文版)
Test methods for solar-plus-supplementary water heating system (tank capacity more than 0.6m3)
  GB/T 14999.3-2012
高温合金试验方法 第3部分:棒材纵向断口检验(中英文版)
Test methods for superalloys - Part 3: Verification of longitudinal fracture of bars
  GB/T 14999.2-2012
高温合金试验方法 第2部分:横向低倍组织及缺陷酸浸检验(中英文版)
Test methods for superalloys - Part 2: Verification of transverse macro-structures and defect by etch
  GB/T 14999.4-2012
高温合金试验方法 第4部分:轧制高温合金条带晶粒组织和一次碳化物分布测定(中英文版)
Test methods for superalloys - Part 4: Determination of characterizing banding grains and primary carbides distribution of superalloy rollings
  GB/T 25967-2010
带辅助能源的家用太阳能热水系统热性能试验方法(中英文版)
Test methods for thermal performance of domestic solar-plus-supplementary water heating systems
  YD/T 2075-2010
2ghz td-scdma/wcdma数字蜂窝移动通信网 支持国际移动设备标识(imei)校验的终端设备测试方法(中英文版)
2GHz TD-SCDMA/WCDMA digital cellular mobile telecommunication network test methods for mobile equipment supporting IMEI checking
  GB/T 14999.7-2010
高温合金铸件晶粒度、一次枝晶间距和显微疏松测定方法(中英文版)
Test methods for grain sizes,primary dendrite spacing and microshrinkage of superalloy castings
  GB/T 14999.6-2010
锻制高温合金双重晶粒组织和一次碳化物分布测定方法(中英文版)
Test methods for characterizing duplex grain sizes and primary carbides distribution of superalloy forgings
  YD/T 944-2007
通信电源设备的防雷技术要求和测试方法(中英文版)
Technical Specification and Testing Methods for Surge Protection of Power Supply for Communications
  GB/T 16821-2007
通信用电源设备通用试验方法(中英文版)
General test methods of power supply equipments for telecommunications
  GB/T 20114-2006
普通电源或整流电源供电直流电机的特殊试验方法(中英文版)
Specific test methods for d.c. machines on conventional and rectifier-fed supplies
  YD/T 1104-2001
通信用开关电源系统监控技术要求和试验方法(中英文版)
Technical Requirement & Testing Methods for supervision Module of Telecommunication Switch Power Supplies

找到:23條目   |  [首頁]-[上一頁]-[下一頁]-[尾頁]  | 去到: 1 2